What is the typical access time for a register? MCQ with Answer and Explanation

What is the typical access time for a register?
A. About 10 nanoseconds
B. About 1 microsecond
C. Less than 1 nanosecond
D. About 100 nanoseconds
Answer: Option C
Solution (By JKSSB Mock Tests)
Registers are extremely fast, with access times typically less than 1 ns, often a fraction of a clock cycle.

Discuss this Question (0)

No comments yet. Be the first to start the discussion!

Practice More Memory and Storage Devices Questions

Question #1
What is the function of a memory scrubber?
A. To correct errors in memory by reading and rewriting data
B. To erase memory contents
C. To increase memory speed
D. To clean dust from memory modules

Correct Answer: Option A


Explanation:
A memory scrubber is a background process that reads memory locations and corrects errors (using ECC) to prevent accumulation of errors.

This question belongs to: Computer Memory and Storage Devices
Question #2
What is the purpose of a memory map?
A. To store data in a hierarchical manner
B. To assign physical addresses to memory devices
C. To track free memory blocks
D. To allocate cache lines

Correct Answer: Option B


Explanation:
A memory map defines the layout of physical memory, including the address ranges assigned to different types of memory (RAM, ROM, I/O devices) in a system.

This question belongs to: Computer Memory and Storage Devices
Question #3
Which memory metric describes the time interval between a memory controller issuing a command and the data becoming available on the output pins?
A. Clock Rate
B. Refresh rate
C. CAS Latency
D. Bandwidth

Correct Answer: Option C


Explanation:
CAS (Column Address Strobe) Latency indicates the delay cycle count between an internal data request command and when the first bit of data is delivered.

This question belongs to: Computer Memory and Storage Devices